Walnut Floating Desk (44 x 22 x 5.5″) – Woodworking Plans

Description

Supplies

• 3/4″ 2×4′ Plywood (2 @ $29.98)
• 1/2″ 2×4′ Plywood (1 @ $29.98)
• 1/8″ 2×4′ Hardboard Panel ($5.59)
• 2×8′ Walnut Wood Veneer 10 mil Paperback ($45.19)
• 3/4″x50′ Walnut Wood Veneer Edge Banding ($15.09)
• (16) #6×1″ Wood Screws (2 @ $1.28)
• (6) #8×2″ Bolts, Washers, Nuts
• (8) 1″ Pocket Hole Screws
• (13) 1 1/4″ Pocket Hole Screws
• 1/8″ Bass Wood (scrap for drawer slide shims, if needed)
• 16″ Soft Close Drawer Slides (2 @ $16.68)
• Recessed Power Strip w/ USBs ($20) (I repurposed one)
• Satin Quick-dry Polyurethane
• Mineral Spirits
• Lint-free rags/old t-shirts/sheets
• Buffing Pads 6 Inch Polishing Pads (optional)
• 1″ ID PVC Pipe (small piece for desk hole cover grommet)
• (4) 3/8″ Dowels

Tools

• Table Saw
• Miter Saw
• Orbital Sander
• Drill
• Various Size Drill Bits
• Phillips-Head Screwdriver
• 1 1/4″ Hole Saw Bit
• Pocket Hole Jig
• Clamps (90° Pony & 12″ Bars)
• 80, 150, 220 Grit Sandpaper
• Brown Paper Bag
• Wood Glue
• Level
• Tape Measure
• Ruler
• Pencil
• Utility/Exacto Knife
• Painters Tape
• Steam Iron